Mubychem Group, established in 1976, is the pioneer manufacturer of Magnesium Chloride Hexahydrate Anhydrous, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Magnesium Chloride BP USP Grade Manufacturers
Magnesium Chloride Pure Hexahydrate Anhydrous Manufacturers
MSDS of Magnesium Chloride Anhydrous Manufacturers
Magnesium Chloride
Anhydrous, Lumps, Powder, Crystals, Hexahydrate
CAS Number 7791-18-6 & 7786-30-3, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
We manufacture magnesium chloride in all grades like technical, pure, food grade, IP BP USP AR ACS Grade etc.
Magnesium Chloride USP Grade Specifications
MgCl2.6H2O 203.30
Magnesium Chloride USP
Magnesium Chloride Hexahydrate USP [CAS 7791-18-6].
Magnesium Chloride Anhydrous USP 95.21 [CAS 7786-30-3].
Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where the product is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter— not more than 0.005% is found.
Sulfate — A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium— Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium— the limit is 0.01%.
Potassium— Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 µg per g.
Heavy metals — the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Magnesium Chloride BP Ph Eur Grade Specifications
MgCl2.6H2O
Magnesium Chloride BP
Magnesium Chloride Hexahydrate BP [CAS 7791-18-6].
Magnesium Chloride Anhydrous BP 95.21 [CAS 7786-30-3].
DEFINITION
Content
98.0 per cent to 101.0 per cent of MgCl2,6H2O.
CHARACTERS
Appearance
Colourless crystals, hygroscopic.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides
Maximum 500 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 0.1 per cent.
Iron
Maximum 10 ppm, determined on solution S.
Potassium
Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals
Maximum 10 ppm.
Water
51.0 per cent to 55.0 per cent, determined on 50.0 mg.
Magnesium Chloride FCC Food Grade Specifications
MgCl2·6H2O Formula weight 203.30
DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.
Magnesium Chloride Hexahydrate ACS Grade Specifications
Magnesium Chloride ACS American Chemical Society Reagent Grade
MgCl2-6H2O
Formula Weight 203.30
CAS Number 7791-18-6
REQUIREMENTS
Assay: -------------- 99.0-102.0% MgCl2 . 6H2O
MAXIMUM ALLOWABLE
Insoluble matter: --- 0.005%
Nitrate (NO3): ------ 0.001%
Phosphate (PO4): ---- 5 ppm
Sulfate (SO4): ------ 0.002%
Ammonium (NH4): ----- 0.002%
Barium (Ba): -------- 0.005%
Calcium (Ca): ------- 0.01%
Manganese (Mn): ----- 5 ppm
Potassium (K): ------ 0.005%
Sodium (Na): -------- 0.005%
Strontium (Sr): ----- 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): ---------- 5 ppm
Magnesium Chloride BP USP FCC Food grade ACS Analytical Reagent Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: anmol@pcmenergy.com
Copyright and Usual Disclaimer is Applicable.
Global or International Magnesium Chloride Anhydrous Hexahydrate BP USP FCC Food Grade Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
23-Jun-2025